Tawoia Touch Doorbell No Neutral Line Required 1 gang 1 way normal touch doorbell switch 86mm 110V-250V AC 1000W

Description

Have you ever been troubled by these problems? When relatives and friends visit, but can't hear the sound of knocking on the door, the old-fashioned doorbell wiring is too cumbersome. When there is an emergency at home, I don't know how to wait. But with the electronic doorbell, you can better enjoy the new smart home life.

The advantage of the electronic doorbell is that it does not need wiring, the installation is very convenient, plug and play, even if it rains, you don't have to worry about being damaged. At the same time, different suits can be selected according to personal needs, and the number of doorbell switches and doorbells can be flexibly selected and matched. In addition, the electronic doorbell is not only a doorbell, it is also a pager, which can be placed in the room of the elderly, children or pregnant women. change.

Moreover, people pay more and more attention to safety issues in family life, and safety-related issues should start from security. When installing the door, the installation of the doorbell is definitely indispensable. The doorbell switch is a relatively good brand product, and there are many types of doorbell switches. The following is a detailed introduction to the types of doorbell switches.

The doorbell switches installed in modern people's homes tend to be more and more intelligent and convenient, so what types of doorbell switches are there now?

Wired doorbell switch without battery means that the transmitter adopts energy capture technology, which can collect the energy when the user presses the doorbell switch button and convert it into electrical energy to drive the doorbell switch sounder to ring.

The indoor unit, that is, the doorbell switch sounder, needs to be connected to the mains. The control signal generated by the doorbell switch button is transmitted through the wired signal transmitter, and the wired signal receiver of the indoor unit receives the wired signal and then rings.

Ordinary wired doorbell switch, its transmitter is powered by 12V battery, and the receiver is powered by battery or connected to mains. The doorbell switch button emits a wired signal, and the wired signal receiver of the indoor unit receives the wired signal and then rings. From the content of transmission, it can be divided into wired non-visual doorbell switch and wired video doorbell switch.

Wired non-visual doorbell switches only transmit voice signals. When a visitor presses the doorbell switch, the owner can only hear the sound, but cannot see the visitor's image. Connect the electric lock and use the indoor unit to remotely control the electric lock to open the door. The wired intercom access control system integrates wired intercom and remote control to open the door. It avoids the trouble of construction and wiring for wired systems, and is an upgraded product of traditional doorbell switches and access control systems.

Ordinary wired doorbell switches can make calls, but images cannot be seen. Equipped with ding-dong sound, other sounds can be customized; supporting connecting line; simple installation, users can install it by themselves; adopting power-saving design, no power consumption when not working; DC power supply: 2 1.5V AA batteries. The doorbell switch is the way we connect indoors and outdoors, so it is very important to choose a suitable doorbell switch.

Our 1 gang 1 way doorbell switch this touch switch can directly replace the old doorbell switch in your home, extra neutral line is no need to be wired with.  The stand by electrical power can meet less than 0.2W. You can long press the touch button to use it. The completed product consists of a tempered glass panel, a touch module, metal bracket and two mounting screws, which they can be installed together through the metal bracket on the wall by your local electrician. The panel is made of tempered glass which is in 86mm*86mm size and 4mm thickness. This size can be used in most of European countries and some Asian countries. The finish is glossy and the edges are chamfered. This makes the glass panel look modern, clean and delicate. It’s damp proof, explosion-proof and scratch-proof. About the touch module. The module shell is made of fire-retardant Polycarbonate material, the outer size is about 50mm*50mm and 25mm depth. The PCB Electronic components are made in dustless workshop. Advancing Toshiba brand chips are used in our smart touch wall switches. We do quality check tests for each batch. 

All the good materials and professional production environments make our TAWOIA brand wall switches and power sockets in good and stable quality. For the working voltage, it is 110V-240V A.C. 50/60Hz, the loading electrical power is 3-800W/gang, 1000W in total. It can work in the environment of temperature from -20℃ to 70℃ and the relative humidity is from 10% to 93%. All touch switches comply with EU CE electrical standards. And we applied CE, RoHS, CB for our smart touch wall switches and power sockets. At the same time, we have patents for the design and technology of our products. All the packaging are in environment friendly way.

FAQ

Q1:Are you a factory or a trading company?

A:Industry and trade integration.

Q2:Are custom services available?

A:APP interface customization, packaging customization, product customization.

Q3:Why choose us?

A:High value, high quality and cost-effective.

Q4:How do you guarantee the quality of your products?

A:Circuit board flying probe inspection, welding SPI\AOI inspection, product function test\aging test, all-round guarantee of product quality.

Q5:Does your packaging ensure product safety?

A:The outer packaging is drop tested to ensure that the product is not damaged during transportation.

Q6:Do you provide quality assurance?

A:The product has passed CE\ROSH certification, and quality assurance services are provided at any time if there are quality problems within two years