TAWOIA Tuya Smart Touch Wall Switch 1 gang 1 Way wifi touch switch with Neutral line 86mm App Voice Control

Description

There are two types of smart homes: wired and wireless. Wired smart homes need to pre-embed the host in advance. The advantage lies in the stable transmission of signals and the stable and reliable interaction between devices. However, the installation of the host needs to be completed during the hard installation period. Therefore, it is necessary to make adequate preparations and plans in the early stage of decoration. From design to construction, after installing the equipment, network debugging, and then realize daily use. Wireless smart home is simpler, more convenient and more flexible. No need for pre-planning, suitable for rear-mounted players. Through the wireless network, devices can be added as needed in daily home life, and the construction cost is low. It is already the mainstream and future development trend of the smart home market.

Our 1 gang Wi-Fi touch switch with neutral line, it's usually better for a new house installation. "L" is for Live line load; "N" is for Neutral line output; and "L1" is for the first circuit of lights.  The Wi-Fi switch can support Wi-Fi  IEEE 802.11 2.4 GHz b/g/n channel, so you can control this smart switch by "Smart Life" phone App. Setting time and making a group with other smart devices. You also can connect them with your local voice assistants, like Google Home. Just say "Hello, Google. Turn on the light." The smart touch switches will help you turn on the lights automatically. For the working voltage, it is 90V-250V A.C. 50/60Hz, the loading electrical power is 1000W load. It can work in the environment of temperature from -20℃ to 70℃ and the relative humidity is from 10% to 93%. The stand by electrical power can meet no more than 0.2W. You can just touch the glass panel to control the lights. 

The completed product consists of a tempered glass panel, a touch module, metal bracket and two mounting screws, which they can be installed together through the metal bracket on the wall by your local electrician. 

The panel is made of tempered glass which is in 86mm*86mm size and 4mm thickness. This size can be used in most of European countries and some Asian countries. The finish is glossy and the edges are chamfered. This makes the glass panel look modern, clean and delicate. It’s damp proof, explosion-proof and scratch-proof. About the touch module. The module shell is made of fire-retardant Polycarbonate material, the outer size is about 50mm*50mm and 25mm depth. The PCB Electronic components are made in dustless workshop. Advancing Toshiba brand chips are used in our smart touch wall switches.

Precautions before installing the smart switch:

1. Confirm whether there is a zero-line smart switch in the switch box at home. Compared with the multiple communication components inside the traditional ordinary switch body, it is generally required to have a zero-line stable power supply. In most cases, there is only a live wire and no neutral wire in the switch box in the electrician's home. It is recommended that users who have new house decoration needs, try to remind the electrician when entering water and electricity, and reserve a zero line for each switch box in the home. For the lighting upgrade of the old house, if there is no zero line at home, you can also choose the single-fire version of the smart switch to install and use.

2. The 86-type bottom box is selected from non-metallic materials. The traditional mechanical switches use the 86-type bottom box, so the major brands of smart switches also use the 86-type specification design. It is recommended to try not to choose a bottom box with too long specifications such as 118 or a shallow depth.

3. A maximum of three circuits are reserved for each switch. Refer to the general home living room decoration. There are usually three lighting control circuits for the switches at the entrance: living room lights, entrance lights and corridor lights, or the lights at the door of the bedroom control the main bedroom lights, bed lights Headlights and lights in toilets. It is recommended to control three circuits in general, not only one switch can control the lights in multiple areas, but also can be directly modified and replaced when the smart switch is installed later. At the same time, it is also reminded that if you plan to install smart switches, you do not need to reserve dual control lines on both sides of the bedside in the bedroom. Ann wants to achieve dual control of lights at the bedside can be achieved through the pairing of wireless switches.

We do QC test for each batch. All the good materials and professional production environments make our TAWOIA brand touch wall switches and electrical power sockets in good and stable quality. All touch switches and sockets comply with EU CE electrical standards. And we applied CE, RoHS, CB for our smart touch wall switches and power sockets. At the same time, we have patents for the design and technology of our products. All the packaging are in environment friendly way.

FAQ

Q1:Are you a factory or a trading company?

A:Industry and trade integration.

Q2:Are custom services available?

A:APP interface customization, packaging customization, product customization.

Q3:Why choose us?

A:High value, high quality and cost-effective.

Q4:How do you guarantee the quality of your products?

A:Circuit board flying probe inspection, welding SPI\AOI inspection, product function test\aging test, all-round guarantee of product quality.

Q5:Does your packaging ensure product safety?

A:The outer packaging is drop tested to ensure that the product is not damaged during transportation.

Q6:Do you provide quality assurance?

A:The product has passed CE\ROSH certification, and quality assurance services are provided at any time if there are quality problems within two years